A longer-lasting finish
Repairs and an open profile help any coating or tile system perform as intended.
Prep the shellThe part that decides how long a floor lasts
Garage floor crack repair and concrete prep
Cracks, pits and spalled patches repaired and the slab ground to a clean profile, so any coating, tile or sealer has something solid to hold onto.
- Flooring
- Prep the shell
- Free estimate
A coating cannot fix a failing slab. Cracks reflect through, loose concrete lifts and contaminated surfaces repel the very product meant to bond to them. Proper prep is repair first, then a ground, clean, dry surface.
We follow cracks, fill them with a flexible or rigid repair material suited to the type of movement, patch pits and spalled areas and level small dips. Then the whole floor is diamond ground and vacuumed. This is the unglamorous step that decides how long the finished floor lasts.
You may need this if
- Cracks run across the floor
- Pits or flaking patches are visible
- An old coating is peeling
- Oil stains have soaked into the slab
From plan to finished.
The steps for crack repair & concrete prep, in the order they happen.
- 01
Map the damage
Cracks, spalls, joints and low spots are marked and classed by whether they move.
- 02
Repair the slab
Cracks are opened, cleaned and filled, and spalled or pitted areas are patched and leveled.
- 03
Grind the surface
A diamond grinder removes laitance and old coatings and opens the concrete.
- 04
Clean and verify
Dust is vacuumed, oils are treated and the surface is checked before a finish goes on.
What you get.
Smoother result
Patched and leveled areas disappear under the final floor.
Fewer surprises
Problems are found and fixed before they show up through a new floor.
Works with any finish
Prep is the same foundation for coatings, polishing and tiles.
Before and after: stained concrete to flake floor
Illustrative scene created to show the kind of change a project can make. Drag the handle to slide between before and after.
Is it right for your garage?
A good fit when
- Cracked or flaking slabs
- Floors with old coatings
- Any garage heading for a new finish
Worth knowing
- A repaired crack is stable but may still be visible as a thin line under some finishes.
- Structural settlement or slab movement is a separate matter that may call for a specialist.
Good questions about crack repair & concrete prep.
Will cracks come back through the coating?
Hairline cracks that do not move are usually well managed with proper repair. Active cracks can reflect, and we explain the options before you decide.
Is grinding better than acid etching?
Diamond grinding creates a more consistent profile and removes contaminants, which is why it is the standard for lasting coatings.
Can heavy oil stains be removed?
Many can be treated, though deeply soaked oil can resist full removal. We test and tell you the likely result.
Related services.
B-01FlooringGarage Floor CoatingsProfessionally prepared and coated garage floors that resist stains, hot tires, chemicals and daily wear, and are easy to sweep and mop.Prep the shell
B-08FlooringMoisture Testing & Concrete SealingMeasure the moisture moving through your slab, then choose a primer, sealer or mitigation system that fits what the test shows.Prep the shell
B-04FlooringInterlocking Floor TilesRigid tiles that lock together over your existing slab, hide cracks, resist oil and let you drive on the floor the same day it is laid.Prep the shell
B-06FlooringPolished & Sealed ConcreteGrind, densify and polish the slab you already have for a low-sheen, dust-free floor with no coating to peel and nothing to re-apply.Prep the shellGuides that help you decide
Garage Floor Cracks, Pits and Spalling: Repair GuideTypes of garage floor damage, what causes each and how professionals repair hairline cracks, control joints, pits and flaking surfaces.2 min read 
Concrete Prep: Diamond Grinding vs Acid EtchingWhy grinding is the professional standard, what acid etching does and does not do and how to check a surface…2 min read 
Garage Floor Moisture Tests and Vapor BarriersThe three common slab moisture tests, how to read them and what to do about high readings before a coating…2 min read